workshop

DIY marshmallow gun

Who doesn’t want to challenge their friend to a fun and friendly marshmallow gunfight! You must be surprised that something like a marshmallow gun actually exists. But we’re here to make everything possible! Make get-together more fun with this simple five-step marshmallow gun. Read more to find out how it’s made.

 

Products needed for this DIY project:

1.      PVC pipe (half inch diameter)

2.      T joints

3.      Elbow joints

4.      Stoppers

5.      Decorative supplies

 

Let’s get started with this DIY project!

 

Step 1:

Take a PVC pipe and using a sharp tool cut it into the following lengths:

·        One fifteen-inch long section

·        Two two-inch long sections

·        One three-inch long section

·        Two four-inch long sections

·        One six-inch long section

Step 2:

Now that the PVC pipe has been cut it’s time to start assembling our marshmallow gun together! Take a T-joint and from one side insert a fifteen-inch barrel into it. Then insert a two-inch barrel into the opposite hole of the T-joint. Lastly, insert a four-inch barrel into the hole perpendicular to the T-joint and add a stopper at the bottom of it on the other side.

Step 3:

Push another t-joint into the other side of the two-inch barrel inserted in the first step.  Connect another two-inch barrel to the opposite side of this and attach an elbow joint to the other side of this two-inch barrel. Insert a four-inch barrel into the second side of this elbow joint and add a stopper at the bottom of it on the other side.

Step 4:

To the perpendicular hole of the t-joint used in the previous step, add a three-inch barrel. Connect another elbow joint to this contraption and insert a six-inch barrel into the other side of the elbow joint.

Step 5:

Now that the structure is ready it’s time to decorate our marshmallow gun. For this step, you can let your imagination run wild. You could use colorful tape, spray paint, or anything else you wish to use to decorate your marshmallow gun.

Your marshmallow gun is now complete! You can insert the marshmallow through the six-inch barrel on the top and it’ll come right through the fifteen-inch barrel. Have a friendly marshmallow gunfight with your friends and enjoy the delicious treats later!

0 Comments
    Leave a Comment
    Subscribe to our Newslatter

    Sign up for free and be the first to get notified about new posts.